Autowatch Ghost Immobiliser Installation
The Ghost is the most advanced aftermarket in the UK. CAN bus immobiliser. It's discreet, does not use LED indicators or key fobs and is concealed in the wiring of your vehicle.
It also allows users to disable the system temporarily by using Transport Mode in the event of renting out their vehicle. This guide will guide you through the installation of a Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser is a modern security device that guards your vehicle against hacking, key cloning and relay attacks. The system is connected directly to the ECU of your car and protected by a PIN code that you choose. It's undetectable to thieves using diagnostic scanners or other modern methods, and is unable to be disabled by cutting circuits.
The system is easy to use, however professional installation is recommended to ensure a clean connection to the ECU of your vehicle. Installers approved by Thatcham can assist you with the installation and programming of your Ghost system. They can also recommend a tracking or alarm system to complete the security package for your vehicle.
To avoid the accidental deployment of short circuits or airbags To avoid an accidental deployment of airbags or short circuits, the installer must disconnect your battery. Once the battery is disconnected, the installer may safely begin working. Basic hand tools can be used for precise connections. ghost 2 immobiliser problems is a great tool to test electrical values. Cable ties and insulation tape are also necessary for securing connections and keeping wiring neat. The Ghost Immobiliser user manual will provide specific guidelines specific to your particular model.
It is important to choose a grounding location that is free of any paint or debris during installation. Installers must also ensure that the immobiliser's wires CAN H & the CAN L are connected to the proper ECU ports. These wires can be plugged into or soldered depending on the model. A top-quality connector is recommended to ensure a sturdy and reliable connection.
Transport Mode can be activated by the customer once the installation is complete. This allows mechanics or valet parking to use the vehicle without having to know the pin code. The customer must press the icon for service on the dashboard five times over 2 seconds. The system will confirm this by displaying 5 indicators.
The Autowatch Ghost 2 immobiliser is TASSA approved and a highly efficient immobiliser. It's a smart option for anyone who regularly rents out their cars through platforms such as Turo. Having an immobiliser can also reduce insurance premiums, since it greatly reduces the chance of theft.
Getting Started
If you're seeking a solution to secure your vehicle from thieves it is best to go with an autowatch ghost immobiliser. It will stop your car from starting even when a criminal steals or copies the key. This is due to its high-tech technology that is designed to stop the engine from starting until the correct PIN code is entered.
The device connects to the vehicle's bus network CAN and allows direct communication with the ECU. It makes use of the buttons on your dashboard and steering to create a unique sequence, that only you can understand. This makes it impossible for anyone else to start your car. This is the most secure way to protect your pride and joy. It will keep its value intact in the event that you decide to sell it.
Installing a ghost ignition is an easy procedure, but it is crucial to follow the steps carefully to avoid issues with electricity and system malfunctions. First, you need to locate and identify a constant 12V power source as well as an appropriate grounding point on the chassis of your vehicle. Then, you can begin to connect the wires to the immobiliser. Be sure to use high-quality connectors and soldering methods to ensure a solid connection. Also, make sure to protect the connections by insulating them with heat shrink tubing or insulation tape to shield them from short circuits in electrical power and other problems.
Once the wires have been connected, you are able to connect the battery and begin the engine to check whether the immobiliser is functioning. Once you have verified that everything is working correctly and you are satisfied, you can place the immobiliser in a secure location in the vehicle. Be sure to conceal it well so that a thief cannot get it into a compromising position.
The Ghost 2 immobiliser has been TASSA (Tracker and Aftermarket Security System Association) that means it is a high-quality deterrent to car burglars. It is a superior defense against key cloning, hacking and relay attacks, and isn't able to be disabled unless you know the code. The device is simple to use and can be set to the service valet setting to ensure that your vehicle will not be activated if you take it for an MOT or service.
Wiring
The Ghost Immobiliser, a cutting edge security system, is designed to deter theft of vehicles. It is directly connected to the vehicle's CAN bus and communicates with the ECU, making it virtually undetectable as an addition to your vehicle. Contrary to other aftermarket systems which require the removal of circuit components the Ghost Immobiliser won't interfere with any of the factory settings of your vehicle.
It's also completely undetectable to thieves using diagnostic scanning devices. This is because the system doesn't send and receive radio frequency signals, and it uses CAN data to communicate with your ECU. It doesn't require any modifications to your existing key fobs.
To make use of the Ghost Immobiliser simply turn on your car's ignition and enter your disarm sequence (either one or two buttons). The indicator will flash twice to verify that you've entered the correct code. Now you can begin driving your car safely.
Once installed The Ghost Immobiliser can protect your car from hacking and key cloning while preserving the value of your most prized possession. If you have to surrender your car to valet parking or for service The Ghost Immobiliser will be temporarily disabled in Transport Mode.
To complete a Ghost Immobiliser installation, you'll need locate an energy source that is constant (12V) and an earthing point. Make sure that both are well-insulated and able to be touched. It is also recommended to use cable ties to tie and secure the wires. This will reduce the risk of being tampered with by thieves. To avoid committing mistakes, double-check these points and mark them with the use of tape or labels. It's also a good idea to examine all connections for signs of wear and tear. Connectors that are loose could cause malfunctions in the system, so make sure that they're firmly fixed and well-insulated. Don't forget to test the Ghost Immobiliser after the installation is completed. This will make sure that the unit is functioning correctly, and that all connections are safe and well-insulated. Be sure to correct any issues immediately.
Testing
The Autowatch Ghost Immobiliser is a cutting-edge car security system that seamlessly into your vehicle's ECU to block the engine from starting without authorization. Its cutting-edge technology protects your vehicle against hacking and key cloning along with other common methods used by thieves to steal vehicles. The Ghost works in conjunction with existing alarm and tracking systems to offer the ultimate protection for your vehicle. This system's unmatched features and subtle design make it a preferred choice for car enthusiasts and security-conscious drivers too.
In order to ensure that the Ghost Immobiliser is properly integrated the Ghost Immobiliser, you must to follow every step of the installation process. The best place to start is to look over the wiring diagram for your vehicle that serves as a roadmap for locating and connecting the wires required. The next step is to identify the power source and grounding points. Once you've found them, you will be required to mark the points so that they are easy to identify when installing. It is essential to use top-quality materials and tools. Basic hand tools can help in making connections that are precise while a multimeter can verify electrical values and ensure security. Insulation tape and cable ties can help keep connections neat and tidy. A Ghost-specific user's guide is also available.
Before beginning the installation it is important to test the system by entering the PIN code and starting the vehicle. This will ensure that the immobiliser is working as it should and stop unauthorised vehicle starts. It is recommended that you perform this procedure regularly as part of your regular inspections of the vehicle to ensure the system is always functioning properly.
Once the installation is complete Once the installation is complete, you can drive your vehicle with confidence. The Ghost will help keep your car and its contents safe from potential thieves, ensuring that nobody can escape with your car without the correct PIN. The Ghost can also be linked with a tracker approved by Thatcham to detect any attempts to tamper with or steal your vehicle and allow you to track your vehicle if it's stolen.
The Ghost is compatible with a variety of vehicles, including those made by the majority of major manufacturers. If you are interested in protecting your car with this cutting-edge device, contact Monty's Locksmith today to find out more about our installation and maintenance options. We are a TASSA Registered installer This certification ensures that we adhere to the strictest standards and procedures for installing our products. This assures customers, insurance companies and law enforcement agencies that installations are done safely and correctly.